Free Tool
Masonry Cost Estimator for Newark and Essex County
A budgeting range for common masonry work, built on published cost sources, with no contact details required.
Typical budgeting range
$300 to $2,000
Based on $3 to $20 per sq ft.
Source: HomeGuide (2026), national. National figure, not adjusted for Newark.
Budgeting ranges from published cost sources checked 2026-10-21. Not a quote and not our rates; the price for your wall comes from a site visit.
How the estimator works
Each range comes from a published cost source and is shown with that source and the date it was checked (October 21, 2026). Pointing, wall repair, veneer repair and stone repointing ranges are per square foot, so the estimator multiplies the published low and high rates by the area you enter. It does not apply any Newark multiplier, because no published Newark adjustment exists for this work. The single-brick, ten-brick and fifty-brick figures come from a cost calculator run for ZIP code 07102 in Newark. Chimney rebuilds, lintels, stoops, parapets, block walls and wall rebuilds show what drives the price instead of a number.
The ranges are budgeting figures, not quotes and not the rates of True Course Masonry Newark. A real price comes from looking at the wall: joint depth, how well the brick matches, height and access, and what turns up once old mortar or brick comes out. The masonry repair cost guide, the brick pointing cost guide and the chimney repair cost guide explain each factor.